XF Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi all, I have an xf 09 3ltr.

As I switch the engine on a second later it says RESTRICTED PERFORMANCE.

I have a scan tool which also a mechanic has done done with his, which was to clear the fault or code, but as cleared it returns instantly and in limp mode.

The code is p00bd I've changed the MAF and air filter with no luck.

Any one been through this or have an idea on how to resolve.
 

·
Registered
Joined
·
9 Posts
According to my manual P00BD-00 shows Mass or Volume Air Flow A Circuit Range/Performance -Air Flow Too High - No sub type information Charge air system leak Refer to the relevant section of the workshop manual and check for air leaks in the intake charge air system.
NOTE:
Using the manufacturer approved diagnostic system
perform the (Turbo, EGR and air path dynamic test)
routine
 
1 - 3 of 3 Posts
Top